Find out what went wrong and how to fix it so that your Firestick remote works again.
There is no doubt that Amazon’s Firestick is the most popular media player on the market right now. The internet connects you to many forms of entertainment. Firestick will let you stream movies, TV programs, and original programming from Amazon Studios on your TV via the Amazon Instant Video app. Playback on any media device, even Firestick, is controlled by a separate remote controller.
Why Should you use Amazon Firestick?
There are a lot of people using the Amazon Fire TV Stick and Fire TV Stick 4K. You should utilise them as they’re simple to use, have strong search capabilities, integrate with Alexa, and have countless streaming applications.
How to Resolve the Problem of the Firestick Remote Not Working?
Below you’ll find a list of probable reasons and solutions to the “Firestick remote not functioning” problem.
Try restarting your Firestick.
In many cases, a restart will take care of small concerns. If the problem is with the Firestick, then this is the best way to repair the remote not functioning problem. The remote will no longer operate, Amazon Fire TV remote voice search will not work, and the orange light on the remote will no longer flash if you do this.
Check your batteries
If the batteries in your Firestick remote stop working, you won’t be able to use it. Check to see whether the battery in your Firestick control has run out. Remotes that use infrared and do not use Bluetooth will use less power than those that do. Using the remote on a regular basis will deplete the battery faster.
How to Fix it?
Step 1
Disconnect the remote control from the Firestick and remove the batteries.
Step 2
Do not forget to double-check the battery installation!
Step 3
If the existing battery isn’t working, recharge it or get a new one.
Step 4
Disconnect the remote control from the Firestick and remove the batteries.
Step 5
Disconnect the remote control from the Firestick and remove the batteries.
Try reconnecting the Firestick
If the Firestick remote doesn’t function, it’s possible that you haven’t linked it with your Firestick. In order to use the Firestick’s remote control, you must first pair it with your Firestick. If you buy a replacement remote, you’re more likely to run into this problem.
How to Fix it?
Step 1
Launch Firestick and TV apps on your connected devices.
Step 2
Hold the Firestick close enough to your TV after it starts up.
Step 3
For approximately ten seconds, press and hold the remote’s Home button
Step 4
To see if the remote is working, gently release the Home button and try it again.
Step 5
Even if it doesn’t work, you’ll have to try a few more times to get it right.
Look for Obstacles and Measure the Distance
Despite the fact that the Firestick controller utilises Bluetooth, if you don’t use it within 30 feet, it won’t operate. In addition, obstacles in the path of the remote and Firestick might cause issues.
How to Fix it?
Step 1
Check to see if the remote control is close enough to the Firestick to be effective.
Step 2
Look for any obstacles that are causing the problem and remove them.
Step 3
If your remote doesn’t reach the back of your TV, consider buying a Firestick extension adapter.
Step 4
Take your gadget out of the cabinet and make sure the remote is working properly before continuing.
Try checking buttons on your Firestick
The buttons on the Firestick remote will not function if it hasn’t been linked with your Firestick. It’s possible that you’ll have to first pair your Firestick’s remote control. If that doesn’t work, you’ll have to take things back to the drawing board and reset your remote factory settings.
How to Fix it?
Step 1
Adapter must be unplugged from a wall outlet or Firestick
Step 2
For 20 seconds, hold down the Back, Menu, and the leftmost portion of the navigation ring buttons.
Step 3
Disconnect the remote control from the Firestick and remove the batteries.
Step 4
Start your Firestick now and watch for the home screen to appear on your television.
Step 5
Reinstall the remote’s batteries and wait up to two minutes before using it again.
Step 6
There shouldn’t be a problem because the remote is already set up to work with the TV. If not, then press and hold the Home button for ten seconds to remedy the situation.
Check for interference
The remote control for the Firestick is Bluetooth-based, therefore it might be hampered by interference. To stay on the safe side, make sure no other wireless devices are interfering with your Bluetooth connection.
How to fix it?
Step 1
Check to see whether anything else is in close proximity to the Firestick. In addition to microwaves, wireless gadgets such as cell phones, Bluetooth speakers, and coaxial cables can also be found. Simply remove them from the vicinity of the Firestick.
Try checking the compatibility of your Firestick
Third-party remotes and gaming controllers work with Firestick.
In case you have a non-compatible Firestick remote, you will have the problem of the remote not working. Assuming you buy a remote control out of the box separately, this would be the situation.
How to fix it?
Step 1
Purchase a quality third-party remote control, as there are many low-cost options available on the market.
Step 2
A Firestick remote that doesn’t operate may be the result of the seller authentication failing.
inspect the Firestick remote control to see if it is damaged
Look if your Firestick remote is Damaged
If none of the before mentioned solutions work, then see if the remote itself is faulty. If the remote is broken, you can’t use it to operate the Firestick.
How to fix it?
Step 1
A new remote control will be sent separately.
Step 2
Check to see whether it works with your Firestick.
Install the Fire TV Remote App
Try using the Amazon Fire TV Control app if your Firestick remote doesn’t function at all. It comes in handy if your remote is broken or you don’t have access to a power source.
How to fix it?
You may download the Amazon Fire TV app from the Play Store, the Apple App Store, or the Amazon App Store if you have an Android or an iOS smartphone. With this software, you may use your smartphone as a remote control for your Firestick. Now you can use your smartphone to better manage your Firestick.
Step 1
Install the Fire TV Remote app on your individual devices after downloading it from the web.
Step 2
Sign in to the app with your Amazon credentials.
Step 3
Go to the list of devices and pick your Firestick
Step 4
Use your TV remote to look for a code and enter it into your app.
Step 5
As a result, your phone will serve as a remote control for your Firestick
Conclusion
The inability of the Firestick’s remote control to function is a short-term problem that can be readily resolved. Following the aforementioned steps fixes the problem in the vast majority of situations. If everything else fails, reset your Firestick remote to the factory default settings.
Was this article informative and helpful? If you would like to share some additional information feel free to do so in the space given below. Follow us on our social media accounts for more updates on articles like these.